Effect of eigenvalue solution on characteristics of double diffusive salt fingers, Faria Rehman, Manoj Dhiman, O. P. Singh, J. Mech. Sci. Technol., 30(6) (Springer, impact factor: 1.128), 2016.
Analysis of Indirect Solar Dryers Using Computational Fluid Dynamics – A Review, O.P Singh et al., Int. J. Sci. Prog. Res., 41(1), (impact factor: 4.427) 2017.
Computer Aided Modeling and Finite Element Analysis of Human Elbow, Arpan Gupta, O. P. Singh, Int. J. Biomed. Clinic. Eng. 5(1), 2016.
Design of engine exhaust system for optimum heating of catalytic converter and back pressure control, Amogh Amladi, Dhruv Vashisth, Hemant Kumar, Atul Dhar, O.P. Singh, J. Energy and Env. Sust., 64-68, 2017.
Effect of Rayleigh number and density stability ratio on characteristics of double-diffusive salt fingers, Manoj Dhiman, Faria Rehman and O.P Singh, J. Physics Conf., (IOP, impact factor: 0.54) 759(1), 2016.
Salt finger convection at neutral buoyancy ratio, Faria Rehman, O. P. Singh, 6th Int. & 43rd national Conf. on Fluid Mechanics and Fluid Power (FMFP), MNNIT Allahabad (India),15-17 Dec, India, 2016.
A comparative CFD based study of coal combustion in air and O2/CO2 environment, Rajneesh Vachaspati, O. P. Singh, and T. K. Ray, Int. Cong. on computational mechanics and simulation, 27-1 July, Indian Institute of Technology Bombay, India, 2016.
Simulation analysis of heat transfer characteristics of solar collector in real surrounding wind factors, Ajeet Singh, O.P. Singh, Int. ISHMT-ASTFE Heat and Mass Transfer Conf., 2017 (submitted).
2014 - 2015
Effect of Rayleigh numbers on the evolution of double‐diffusive salt fingers, O. P. Singh, J. Srinivasan, Phys. Fluids (AIP, impact factor: 2.23), 26(6), pp. 1-18, 2014.
The Effect of rubber dampers on engine's NVH and thermal performance, O. P. Singh et al., Appl. Acoustics (Elsevier, impact factor: 1.92), 75(1), pp. 17-26, 2014. (most downloaded article).
Modern 3D printing technologies: future trends and developments, O. P. Singh et al,. Recent Patents Eng. (impact factor: 0.77), 9(2) 2015.
Effect of dynamic vents on car thermal comfort, O. P. Singh et al., J. Mech. Eng. (impact factor: 0.821), 61(10), 2015.
How Rayleigh number affects the evolution of double-diffusive salt finger convection, O. P. Singh, National seminar on New Dimensions in Mechanics and Allied Fields, Nov 27-28, HPU, Shimla, 2015.
Solar panel printing using 3D printing mechanism, O. P. Singh, ASME Additive Manufacturing and 3D Printing Conf., 20-21 April, Pune, India, 2015
Double-diffusive finger convection: solution methodology and its effect on finger characteristics., Faria Rehman, Manoj Dhiman, O. P. Singh, XXVII IUPAP Conf. on Computational Physics, CCP2015.
3D thermohaline double-diffusive salt fingers, Manoj Dhiman, Faria Rehman, M. Bagga, O. P. Singh, XXVII IUPAP Conf. on Computational Physics, CCP 2015.
An investigation of optimal buildings in Himalayan regions: A BPI based analysis, Arun Kumar, O. P. Singh, Int. Conf. on Buildings, Envelop, Systems and Technologies (ICBEST), Germany, 9-12 June, 2014.
2012 - 2013
Piston seizure investigation: experiments, modeling and future challenges, O. P. Singh et al., Eng. Fail. Anal. (Elsevier, impact factor: 1.68), 28(1), pp. 302-310, 2013.
Effect of cooling system design on engine oil temperature, O. P. Singh et al., J. Appl. Fluid Mech., (impact factor: 0.888) 6(2), pp. 61-71, 2013.
Advances in building materials for thermal comfort and energy saving, Arun Kumar, O. P. Singh, Recent Patents Eng. (impact factor: 0.77), 7(3). pp: 220 - 232 (most accessed article), 2013.
Spalling investigation of connecting rod, S. Khare, O. P. Singh, K.B. Dora, C. Sasun, Eng. Fail. Anal. (Elsevier, impact factor: 1.68), 19(1), pp. 77-86, 2012.
Influence of geometric parameters on centrifugal fan performance and its significance in automotive applications, O. P. Singh et al., Int. J. Model. Simul. Sci. Comput. (World Scientific, impact factor: 0.59), 1250007, 3(3), pp. 18-36 (most read article), 2012.
Car cabin temperature prediction using CFD, Mrinmoy V., Rohit R., O. P. Singh, National conf. on Fluid Mech. and Fluid Power, NIT, Hamirpur, India 12-14 Dec., 2013.
Role of PCM for energy saving in buildings located at complex terrain in Himalayan regions, Arun Kumar, O. P. Singh, Int. conf. on Renewable Energy, Eternal University, Baru Sahib, HP, 5-6 May, 2012.
Energy saving potential of composite walls of buildings located at complex terrain in Himalayan region, Arun Kumar, O. P. Singh, 2nd National conf. of IBPSA-India on Simul. of Buildings for Energy Efficiency and Better Built Environ., MNIT, Jaipur, India, 21-22 Dec., 2012.
2010 - 2011
Effect of muffler mounting bracket designs on durability, S. P. Senthilnathan, O. P. Singh et al., Eng. Fail. Anal. (Elsevier, impact factor: 1.68) ,18(3), pp. 1094-1107, 2011.
Thermal seizures in automotive drum brakes, O. P. Singh et al., Eng. Fail. Anal. (Elsevier, impact factor: 1.68), 17(5), pp. 1155–1172, 2010.
A study of basalt fingers using experiments and numerical simulation in double‐diffusive systems, O. P. Singh, Devesh Ranjan, J. Srinivasan, K. R. Sreenivas, J. Geogr. Geol. 3(1), pp. 42-50, 2011.
Parametric study of centrifugal fan performance: experiments and numerical simulation, O. P. Singh et al., Int. J. Adv. Eng. & Technol. (impact factor: 1.56) 1(2), pp. 33-50, 2011.
A simple and accurate experimental method for measurement of engine oil consumption, Arza Vamsi Spandan, O. P. Singh*, Anil Singanamalli, Kannan M., AMAE Int. J. Manuf. Mat. Sc., 1(2), 2011.
Sustainable design through innovation: an industrial perspective, O. P. Singh, Int. J. Adv. Technol. 2(3) (editorial), 2011.
Optimum knock sensor location through experimental modal analysis of engine cylinder block, Yatin Chaudhary, Stephen Walsh, O. P. Singh, SAE International, Technical paper 2011-32-0637, doi:10.4271/2011-32-0637, 2011.
A multidisciplinary approach for design improvement of an air‐cooled two‐wheeler engine cylinder head, O. P. Singh, T. Sreenivasulu, K. Nagaraja, M. Kannan, SAE International, Technical paper 2010–32–0033, doi: 10.4271/2010-32-0033, 2010.
Cooling system optimization of an enclosed air‐cooled engine, A. Reddy, O. P. Singh, Bhavesh Sharma, M. Kannan, SAEINDIA, Technical paper 1001001, 2010.
An experimental method for engine oil consumption measurement, A. V. Spandan, O. P. Singh, Anil S., M. Kannan, Proc. of Int. Collq. on Computer, Electronics, Electrical, Mechanical and Civil, ICET, 2011.
A 2D CFD model of centrifugal fan, O. P. Singh, Faiz Ahmed, M. Kannan, Star India conf., Bangalore, Nov. 17, 2010.
Conjugate heat transfer and CFD modeling of exhaust system, T. Sreenivasulu, O. P. Singh, M. Kannan, Star India conf., Chennai Nov. 16., 2010.
Experimental and CFD model for design optimization of an automotive centrifugal cooling fan, O. P. Singh, T. Sreenvasulu, Rakesh Khilwani, M. Kannan, Proc. on Fluid Mech. and Fluid Power, IIT Madras, India, Dec 16–18, 2010.
Hydrodynamic modeling for piston seizure investigation using Pisdyn, O. P. Singh et al., India Ricardo Software User Conf., Pune, India, 29 Nov., 2011.
An experimental and computational investigations of two‐stroke piston skirt scuffing, O. P. Singh, T. Sreenivasulu, Yogesh Umbarkar, M. Kannan,Y. R. Babu, Virtual Powertrain conf.., Pune, India, 19-20 Oct., 2011.
2008 - 2009
On the relationship between ﬁnger width, velocity, and ﬂuxes in thermohaline convection, K. R. Sreenivas, O. P. Singh & J. Srinivasan, Phys. Fluids (AIP, impact factor: 2.02) 21(2), pp. 026601, (top 20 most-downloaded article), 2009.
Effect of thermo‐mechanical behavior on drum brake labyrinth design, O. P. Singh, S. Mohan, V. Mangaraju and R. Babu, SAE International, Technical paper 2008–32–0066, doi:10.4271/2008-32-0066, 2008.
Optimization of Air‐cooling system of 4-stroke scooter engine, Vishal Kumar, O. P. Singh, M. Garg and Y. V. Chaudhary, SAE International, Technical paper 2008–32–0071, doi: 10.4271/2008-32-0071, 2008.
Automation of coupled field analysis of generic components, O. P. Singh, K. Sriram, Ansys India conf., 2008.
Design optimization of a two‐wheeler engine cylinder head, O. P. Singh, K. Nagaraja, M. Kannan, Ansys India conf., 2007 (Best paper award).
Thermo‐fluid simulations of a fan‐cooled scooter engine, O. P. Singh, V. Gupta, M. Garg, Star India conf., 2007.
Dynamics of double-diffusive finger convection: structures and convective fluxes, 2006, PhD dissertation, Indian Institute of Science, Bangalore, India.
The role of finger structure in the determination of fluxes in a double‐diffusive thermohaline system, 2006, J. Srinivasan, O. P. Singh, K. R. Sreenivas, 13th Int. conf. on Heat Transfer, Sydney, NSW, Australia, (abstract only).
Effect of Rayleigh numbers on salt finger fluxes, 2005, O. P. Singh, K. R. Sreenivas & J. Srinivasan, Int conf. on Environmental Fluid Mech., IIT, Guwahati, India, March 3–5.
Laboratory study of scale transitions in oceanic double‐diffusive salt fingers, 2005, O. P. Singh, K. R. Sreenivas & J. Srinivasan, Proc. of Int. conf. on Environmental Fluid Mech., IIT Guwahati, March 3–5.
On the contrasting behavior of double‐diffusive salt fingers at high and low Rayleigh numbers, 2005, O. P. Singh, K. R. Sreenivas & J. Srinivasan, First Int. conf. on Diffusion in Solids and Liquids, Aveiro, Portugal (Europe), (Best paper award), July 6–8.
Double‐diffusive finger convection near neutral buoyancy 2004, O. P. Singh, K. R. Sreenivas, J. Srinivasan, Proc. of ASME-ZSIS Int. Thermal Science Seminar II, Bled, Slovenia, June 13-16.
Columnar‐basalt and double diffusive finger instability 2003, Devesh Ranjan, K. R. Sreenivas, O. P. Singh, J. Srinivasan, Bulletin of American Physical Society, Division of Fluid Dyn., 56th Annual Meeting.
Is the formation of columnar basalts due to double‐diffusive fingers? 2003, K. R. Sreenivas, O. P. Singh, J. Srinivasan, Int. conf. on Advanced Fluid Mech., JNCASR, Jakur, India, (Best paper award).
A. On Turbomachinery 2013
Slip factor, Vipul Gautam, A. K. Meena, O. P. Singh
Turbomachinery, Shivanshu Singh, Sreevalsan P., O. P. Singh
Radial turbine, rahul chandel, Prithish seth, O. P. Singh
Axial turbine stages, Diler Savla, Santosh Meena, O. P. Singh
Turbine blade, Salil Jain, Sahil Kapila, O. P. Singh
Blade solidity, Jayesh Gupta, O. P. Singh
Francis turbine, Anupam K., Deepak Choudhary. O. P. Singh
Draft tube, Adhish Bhandari, Akash Pathak, O. P. Singh
Axial compressor, Rohtaz Singh, Sachin Roongta, O. P. Singh
Centrifugal fan, Kunal Thakkar, Lalin T. Dewan, O. P. Singh
Axial-flow pump, Gurbir Singh, Himanshu Khandelwal, O. P. Singh
Axial fan design, Pranjal Jain, Abhilash Monarthi, O. P. Singh.
Drag coefficient, Deepak Sharma, Eshaan Agarwal, O. P. Singh
Combined cycle, Moiz Ahmed, Shashwat Sharma, O. P. Singh
Design feasibility of wind turbine systems, Kunal Kishor, K. S. Meena, O. P. Singh
Hydroelectric power in Himachal Pradesh, Sumit Kant, Surendra Khoja, O. P. Singh
Evolution from Francis turbine to Kaplan Turbine, Pranjal Jain, Abhilash Monarthi, O. P. Singh
Three dimensional losses and correlation in turbomachinery, Abhishek Verma, O. P. Singh
Flow through cascades, Ankur, Ankush, O. P. Singh.
Degree of Reaction, V Praveen, M. Viswas, O. P. Singh.
Compounding of steam turbines, S. P. Singh, Subik K., O. P. Singh.
Compressor characteristic, Vijay Rahul, Sunil Chaudhary, O. P. Singh.
Steam turbine efficiency, Sachin Singhal, Saksham Grover, O. P. Singh.
Steam turbine governing, Anurag Jakhotia, Gaurav Yadav, O. P. Singh.
Euler's pump and turbine equation, Shyam Sundar, Rohit Raut, O. P. Singh.
Variable geometry turbomachine, Nikhil Chabra, O. P. Singh.
Losses in steam turbines, G. Prudhvi Raj, P. Samanth K. Reddy, O. P. Singh.
Solar Turbine Plants, C. Shreeram, M. P. D. Jayanth, Manish S., O. P. Singh.
B. On Computational Fluid Dynamics (CFD) 2013
Numerical solution of the convection–diffusion equation, Nidhi Baranwal, Faria Rehman, O.P. Singh